PM Stepper Motors / PM ステッピング小モーター
Category: Smart Manufacturing
Exhibitor: ETA TECHNOLOGIES LTD.
Booth No: S028
Characteristic
Permanent Magnet DC Carbon Brush Small Motors 小型DCモータ
✔ Motor operating characteristics /モータ運転特性
The motor has fast speed and high starting torque, and the speed decreases with the increase of load torque.
モータの回転速度が速く、始動トルクが大きく、負荷トルクの増加に伴って速度が低下する。
✔ Motor Start and Control/モータの起動と制御
The motor does not require a drive board to start, and the power supply can be connected to the motor pole plate
for forward and reverse rotation. If constant speed operation is required, encoder feed.
モータ起動には駆動板は必要なく、電源にモータ極片を接続すれば正逆転できる. 定速運転が必要な場合は、
エンコーダフィード バックを速度制御として使用することができます。トルクは電流に比例するため、
トルク制御が容易である。
👀 Motor Diameters: 20 ~ 5 2 mm
👀 Input Voltage: 3~24 V ; 120 / 230 V
Permanent Magnet Stepper Motors / ステッピング小モータ
✔ Motor operating characteristics / モータ運転特性
Open loop control without the need for sensors or encoder, precise position and speed control can be achieved.
オープンループ制御(Open-loop control)、センサ(sensor)は不要またはエンコーダを使用すれば、
正確な位置と速度制御を達成することができます。
✔ Motor Control /モータの制御
Switching the pulse signal of the current trigger controls the speed, steering, and position. Adjust the speed
and load of the application to avoid out of step phenomenon in the stepper motor.
電流トリガを切り替えるパルス信号は、回転数、操舵、位置を制御する。ステッピングモータの
非ステッピング現象を回避するために、アプリケーションの速度と負荷を調整します。
👀 Motor Diameters: 20 ~ 55 mm
👀 Input Voltage: 3~24 V
👀 Step Angle : 7.5 degree、 18 degree
👀 Motor Phase Numbers: 2 phase、 4 phase
Other Products
Products you may be interested in
Highest Rated Products