American-made ANVER Vacuum Tube Lifting Systems

Exhibitor: FULL-SHARP AUTOMATIZED CO., LTD.

Booth No: N1308

Characteristic

★ The ANVER vacuum lifter is an ergonomic lifting aid that helps you increase productivity while providing an economical solution to your material handling needs.
★ ANVER vacuum lifter is easy to use, maintain and requires only minimal operator training.
★ The ANVER vacuum lifter can handle the load (by vacuum suction), support, lift and lower the load without need of crane, and all movements can be controlled and completed by a single operator. Connection with vacuum suction cups allows lifting objects without worrying about damaging the surface or edges of the product due to manual gripping and lifting. A high performance fan provides vacuum power to the main hanging pipes to lift and lower the connected load. If the power supply to the fan is interrupted, a power failure safety check valve built into the 360 degree top swivel will slowly reduce the load.
★ The ANVER vacuum handler offers a wide range of lift tubes and models of vacuum stations fans, match up with each other for the most economical and safest system combination to meet your material handling requirements, increasing your productivity and creating a safer working environment.

1. Quick moving, easy operation, for users at all ages and genders to handle moving.
2. No vibration issue during moving and absolutely no damage to the workpiece.
3. When the power is interrupted, the safety control valve will be closed automatically so that the workpiece will not fall instantly, and the workpiece will be descended slowly to ensure the safety of the workpiece and personnel.
4. The controller is equipped with a vacuum pressure gauge, so that the operator can check whether the workpiece is actually picked at any time to improve the safety of use.
5. Various types of suction cup fixtures are available to fit different workpieces.
6. There is also a soundproof box to reduce the noise generated by the vacuum motor.
7. There is a long handle control switch to match the stacking of relatively large height.
8. The installation method is designed and manufactured according to the site requirements.